Home > Industry knowledge > Content
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672
Fax:0755-84071675


E-mail:huaite@vip.163.com
Website: www.huaite.tm

Industry knowledge
Precautions for daily use and maintenance of White Rewinder
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2018-03-12

WinderThe following preparations should be made before commissioning

1. Fill lubricant according to the requirements of equipment technical documents;

2. There should be a gap between the cutter shafts of the longitudinal device, and the size of the gap should meet the requirements of the technical documentation of the equipment;

3. The piston rod of the push-off device should be in the non-working position;

4. The product quality certificate should be checked before assembly of the rewinding machine. The specifications and models of the equipment should meet the requirements of the design documents. Number of inspections: All inspections. Inspection method: check the certificate and inspect the equipment.

Notes on operation and maintenance of rewinder:

Although the rewinding machine is small, it must be arranged for regular maintenance and storage, and the operator must be familiar with the structure and performance of the machine tool. It is strictly forbidden to use the round rewinding machine for overloading, and the hardened steel and hard steel, high speed steel, alloy steel, castings and non-metallic materials shall not be cut.

1. The blade of the rewinding machine should be kept sharp, and the blade is blunt or damaged, and should be repaired or replaced in time. When the operation is performed by multiple people, there should be a special person to command, and coordination should be coordinated. It is forbidden to cut two materials of different specifications at the same time on the rewinding machine, and overlapping cuts are not allowed;

2. The workpiece cut by the rewinder must be placed steadily, not stacked too high, and not allowed to be stacked on the aisle. Remaining materials and waste materials should be cleaned up in time to keep the site clean and tidy.

3. White rewinding machine supports nationwide warranty. When the machine you purchase has problems and failures, you can contact White for repair. We will reply you as soon as possible to help you solve the problem and avoid delaying your daily production.