Home > Industry knowledge > Content
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672
Fax:0755-84071675


E-mail:huaite@vip.163.com
Website: www.huaite.tm

Industry knowledge
How to maintain and maintain the rewinding machine
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2018-03-12

WinderHow to daily care and maintenance

The rewinding machine must be operated by fixed personnel, and be able to master the start-up and bag-making procedures, will be simple instrument debugging, change parameters, etc.; the mechanical instrument debugging personnel must pass the manufacturer's strictness and be able to master the instrument performance, Troubleshooting and handling of working procedures, operating modes, working conditions, common faults; it is strictly forbidden to operate computer meters without personnel. The daily maintenance of the rewinding machine must ensure that the inside and outside of the computer instrument box are clean and dry; regularly check that the wiring terminals are not loose or fall off. Ensure that the circuit and gas path are smooth.

1. The rewinder regularly checks the screws of various parts of the packaging machine to avoid loosening;

2. Pay attention to the waterproof, moisture-proof, anti-corrosion and rat-proof of electrical parts. The electrical control box and the terminals must be kept clean to prevent electrical failure;

3. When the rewinding machine is stopped, the two heat sealing rollers should be in the open position to prevent the packaging material from being scalded;

4. Add lubricating oil to the meshing points of the rewinding machine, the oil injection hole of the seated bearing and the moving parts at regular intervals. When adding lubricating oil, please be careful not to drip oil on the transmission belt to prevent slipping or aging damage to the belt;

5. The newly installed rewinding machine must check and fasten the transmission and moving parts within one week of use, refueling and maintenance; after that, it must be regularly checked and maintained every month.

The basic cleaning of the rewinder includes:

1. The metering part should be cleaned in time after the rewinder is shut down. For example, the packaging is granulated sugar, Banlangen granules, table salt, etc., and it is necessary to ensure that the feeding tray and turntable are cleaned every shift so that they are not corroded;

2. For the heat sealer body, it should be cleaned frequently to ensure that the texture of the sealing of the rewinding machine is clear;

3. The photoelectric tracking light-emitting head, that is, the electric eye, should also be cleaned regularly to ensure small errors in cursor tracking;

4. The scattered materials on the material tray need to be cleaned in time to keep the machine parts clean;

5. Regularly clean the dust in the electric control box to prevent faults such as poor contact.