Home > news > Matters needing attention in the use of White automatic cutting table
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672

Website: www.huaite.tm

Matters needing attention in the use of White automatic cutting table
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2018-03-12

WhiteAutomatic cutting tableMatters needing attention during use

1. Make sure the voltage, current and hydraulic pressure are correct and stable before starting.

2. Before the equipment is ready for operation, all personnel must notify leaving the equipment to ensure personal safety before starting operation.

3. During operation, do not touch the film roll or roller core in operation with your hands, so as to avoid the risk of personal injury caused by rolling your hands.

4. During the operation, avoid scratching or cutting each roller core with a knife or hard object.

The first package: Before the equipment is put into operation, check whether each working position is adjusted properly. Lubricating parts should be filled with lubricating grease in advance. Check whether the tool is sharp.

After everything is normal, it can be run empty, check for abnormalities, and enter the order to be processed into the computer order inspection in advance; after the equipment is put into operation, the best working state of the equipment should be adjusted in time according to the production situation to ensure the pressure of the cutting machine. The marks are moderate, the slitting is free of burrs, and the trimming position on both sides is appropriate. Ensure that the cross-cutting machine feeds and discharges smoothly, and the cutting length is accurate. For the cross-cutting machine connected with production management, it also needs to monitor its operation status from time to time to prevent paper jams and defective products;

After the work is completed, clean up the dust and paper dust on the equipment in time, check the grinding wheel, drain the oil and water in the high water tank and the gas storage tank, and check if there are any abnormalities in the operating parts. Then, cut off the power according to the operation requirements of the manual, and maintain the computer operating system.

Shenzhen White Automation Equipment Co., Ltd. is a professional manufacturer of BOPP tape, double-sided tape, kraft paper tape, masking tape, cloth tape, PE protective film tape, PVC electrical tape, PET polyester tape and other adhesive products. Equipment: coating machine, slitting machine, pipe threading machine, pipe cutting machine, large rewinding machine, single and double shaft automatic cutting table, small rewinding machine, aluminum mold, take-up shaft, bushing, gasket, Tension bar, small spring, header paper, packaging film and other packaging machinery and accessories. And is responsible for equipment installation, commissioning, repair and maintenance.