Home > news > How to maintain the tape cutting machine
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672
Fax:0755-84071675


E-mail:huaite@vip.163.com
Website: www.huaite.tm

news
How to maintain the tape cutting machine
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2018-11-27

Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil; when checking and disassembling the automatic slitting machine, it is strictly prohibited to use unsuitable tools and adopt unscientific operation methods;
The machine will be cleaned and inspected once. If the automatic slitting machine is not used for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. Such as:
If the automatic cutting table is disabled for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, the equipment should be carefully cleaned, the exposed friction surface should be wiped clean, and lubricating oil should be added.Tape cutting machine

To do the daily maintenance and maintenance work of the slitting machine, the following five points should be done.

First, regularly clean and inspect the electrical parts to eliminate hidden dangers in time.

Second, the use of slitting machine is completed by slitting machine and cross-cutting machine. Therefore, high-quality slitting knife and cross-cutting knife should be used.

Third, the daily maintenance of the slitting machine should be in place, and its criterion is that it is smooth, clean, and clear (no dust, no debris) in place, to ensure that the sliding part of the device is in good condition.

Fourth, it is maintenance work. Periodic and unscheduled inspections of rotating parts should be stopped (especially real-time monitoring of wearing parts should be stopped). Carry out regular adjustment, regular replacement, commutator and make detailed records to achieve the purpose of extending the service life of the equipment.
Fifth, improve the technical quality and level of the personnel who operate the slitting machine. The operation of the control part must be assigned by a person, and no one can operate it without permission.