Home > news > How to maintain the tape slitting machine daily
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672

Website: www.huaite.tm

How to maintain the tape slitting machine daily
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2021-04-25

Important parts of the tape slitting machine should be inspected and lubricated before use; when inspecting the slitting machine, it is strictly prohibited to use inappropriate tools and unscientific operating methods to maintain the slitting machine; the tape cutting machine should be thoroughly cleaned and inspected; If the tape slitter is not used for a long time, all shiny surfaces need to be wiped clean, coated with anti-rust oil, and covered with a plastic cover. If the slitter is out of service for more than 3 months, you should use moisture-proof paper to cover the anti-rust oil; after the work is completed, the equipment should be carefully cleaned, and the exposed friction surface should be wiped off and lubricated.

How to maintain the slitting machine in daily maintenance mainly has the following five points.

1. Equipment and electrical components must be cleaned and inspected regularly to remove hidden dangers in a timely manner.

Second, the use of the slitting machine is completed by the slitting machine and the cross-cutting machine. Therefore, high-quality longitudinal and cross-cutting knives must be used.

Third, the daily maintenance of the slitting machine must be in place. The standard is smooth and clean (no dust and debris) to ensure that the sliding parts of the device are in good condition.

Fourth, it is maintenance work. Regular inspections and irregular inspections of rotating parts should be stopped (especially real-time monitoring of vulnerable parts should be stopped). Carry out regular adjustments, regular replacements, commutators and make meticulous records to achieve the purpose of extending the service life of the equipment.

Fifth, improve the technical quality and proficiency of slitting machine operators. Special personnel should be responsible for the operation of the equipment, and no one can operate by themselves without permission.