Home > news > Installation steps and features of tape slitting machine
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672

Website: www.huaite.tm

Installation steps and features of tape slitting machine
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2020-11-20

Due to the characteristics of the tape slitting machine, it is widely used in papermaking machinery and printing and packaging machinery industries. The operation is very simple. However, there are a few things to pay attention to when installing. Strictly follow the installation instructions to avoid installation problems in the future. Unnecessary troubles affected production. Today, the editor edited the information of the slitting machine and showed you the installation and use characteristics of the slitting machine.

1. Installation steps of tape slitting machine

1. When pressing the base of the machine base, first use a spacer to level it. The unevenness deviation in each direction shall not be greater than 0.1mm per meter. After the foundation is leveled, grouting is performed once. After the machine is completely dry, it must be installed and debugged. Tighten the anchor bolts.

2. In the process of installation and disassembly, when lifting the work roll and precision-machined parts, the steel wire rope must not directly touch the processed surface, and the felt pad should be padded to avoid scratches.

3. During installation, all contact surface seals and bolt connection surfaces should be coated with a thin layer of grease.

4. Tighten all fastening bolts and anchor bolts symmetrically.

2. The use of tape slitting machine

1. The multifunctional slitting unit adopts a programmable design, and automatically switches the working mode of the production line according to the nature of the board, which can significantly improve the production efficiency and reduce the maintenance frequency of the tape slitting machine.

2. The telescopic hydraulic cylinders of the tape slitting machine, uncoiler and winder adopt an integrated design with low failure rate.

3. The main shafts of the uncoiler, slitting machine and winding machine are equipped with a high-efficiency disc tension brake combination, which is adjusted by a pneumatic circuit and automatically performs instantaneous tension braking under certain conditions to prevent the coil from being loosened and removed .

4. The clamp feeder automatically feeds materials and can automatically synchronize with the production line.

5. The main machine of the tape slitting machine adopts an integrated frame and an independent transmission structure, which can effectively improve the rigidity of the mechanical structure, while reducing the vibration amplitude of the slitting blade and improving the quality of the finished product.

6. The amplitude accuracy of the reference plane of the longitudinal axis is within 0.006mm, which can better extend the tool life and ensure the accuracy of the finished product.

7. The winding adopts tension winding and has a slip structure, which can effectively improve the stability of mechanical operation.

8. The direct pressure tension damping structure uses wool felt with good elasticity and high friction coefficient as the fabric to ensure the smooth operation of the equipment during the production process; in addition, it is also equipped with a pressure balance device to balance the pressure on both sides of the pressure surface.

9. The separation and compression mechanism adopts hydraulic adjustable back pressure combination to stabilize the pressure and automatically rise as the diameter of the coil increases, and always effectively compress the steel coil.

10. The automatic tension design of the finished roll, and the tape slitting machine can improve the tightness of the finished roll.