Home > news > How big an air compressor is used for tape slitting equipment?
Categories / CATEGORY
contact us / CONTACT US

Shenzhen White Automation Equipment Co., Ltd.
Company Address: No. 7, Faqiang Road, Liulian Community, Pingdi, Longgang District, Shenzhen
Contact: Mr. Shen

Phone: 17722614040
Phone: 0755-84071674, 84071672
Fax:0755-84071675


E-mail:huaite@vip.163.com
Website: www.huaite.tm

news
How big an air compressor is used for tape slitting equipment?
Edit:Shenzhen White Automation Equipment Co., Ltd.   PublicDate:2021-01-06

In order to make the tape slitting machine work normally, these tasks are essential, such as good materials, air pressure, etc., and the latter is completed by an air compressor. How much do we need to use in daily operations?

The standard air pressure used on the tape slitting machine is very small, usually only a few tenths, and an air compressor of six to seven hundred yuan is sufficient. According to the customer's detailed information and specific processing technology regulations, the air compressor required for correct production and manufacturing is adopted. It is neither suitable for foreigners to blindly follow the trend greedily and spend extra money on high-quality and high-priced models, nor to blindly choose fake and inferior models with frequent failures in order to better save costs. . After all, air compressors have been industrialized. Key power equipment in production.

The basic parameters of an air compressor are total flow and working pressure. After selecting the main parameters, select the model and set the output power, no need to choose. You can check the operating instructions of the g10 pneumatic pick to understand how much flow and working pressure must be, and then you can choose the model.

An air compressor is a device used to reduce steam. The structure of an air compressor is similar to a centrifugal water pump. Most air compressors are reciprocating piston machines with rotatable blades or rotating extruder screws. The centrifugal fan compressor is a very large application software. It is the key device of pneumatic control valve. It is the main body of bleed air source equipment for electromechanical engineering. It is a device that converts the mechanical kinetic energy of the motive force (usually an electric motor or a diesel engine) into pneumatic energy. It is a standard air pressure generator to reduce air.

In the field of air compressors in my country, the market capacity has increased by more than 8%, and the annual growth rate from 2010 to 2011 has exceeded 28%. The market capacity is expanding rapidly. As we all know, in such a huge sales market, foreign companies have long controlled most of the sales market. According to the information provided by Qianzhan.com, in 2009, there were nearly 400 manufacturing companies in the air compressor field in my country, of which the total domestic capital was close to 90%, and the total operating income was about 6 billion yuan, accounting for 40% of all fields; the total number of foreign companies was close to 10%, complete the total operating income of about 9 billion yuan, accounting for 60% of the entire field.

The current stage of the tape slitting machine equipment processing plant should be said to be relatively large energy consumption. As a pneumatic equipment, the air compressor is also one of the general equipment in processing and manufacturing. It is one of the company's energy-saving work to complete the environmental protection and energy-saving management method of air compressors.